IH125-100-200 Stainless Steel Chemical Centrifugal Pump

IH chemical centrifugal pumps are designed and manufactured inaccordance with international standards and relevant national standards.Its performance, rated performance points, and size are equivalent to thenational standard ISO2858. National standard number: GB/T5662 Axialsuction centrifugal pump (16 bar) Marking, performance and dimensionsCB/T5566 Technical requirements for centrifugal pumps (II).

This series of pumps adopts various sealing methods according todifferent medium working conditions: external corrugated pipe mechani-cal seal, single end face internal mechanical seal, double end face internalmechanical seal, containerized double end face mechanical seal, andinternal high-temperature and high-pressure corrugated pipe mechani-cal seal. Mechanical seal materials are selected according to different media.

(1) Pressure resistance limit: The pressure resistance limitis 1.6 MPa, and it should be noted that the output pressure of the pumpcannot exceed the pressure resistance limit.

(2) Temperature range: 0-100°C: Environmental temperature range: 0-40 C: Environmental humidity range: 35-85% RH.

(3) If the operating temperature is within the range of l00°C to 150°C. the sealing form needs to be adjusted.

(4)t can transport media with smallamounts of particles and crystals (solid content  10%), and it is forbidden to transport media that will generate a large number of bubbles.

(5) The influence of liquid viscosity on pump performance: When the viscosity of the liquid changes,the performance of the pumpalso changes. The difference in pump selection can be consulted with the company's technical department.